Pop-lock PL1300H3T User Manual

Browse online or download User Manual for For the car Pop-lock PL1300H3T. Pop & Lock PL1300H3T User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
1.
Lower the tailgate and remove the
center 8 MM mounting bolt holding the
handle and bezel.
Loosen the other two bolts 3/8” to 1/2”.
Note: Bedliner panel may have to be removed.
2.
Close the tailgate and carefully pull the
bezel away from the tailgate working
against the three spring clips.
3.
Turn the bezel around and pull the metal
attachment plate out of the mounting
boss.
Push the supplied mounting insert into
place as shown.
4.
Place the POP&LOCK into the lower
right hand corner of the bezel
.
Contents:
Lock Assembly, 2 keys
Mounting Insert
6 MM Hex Bolt
6-32 Flat Head Screw
Instructions, Warranty Card
Tools Required:
10 and 13 MM Socket
Phillips Head Screw Driver
Tech Support:
Call 1-800-342-5911
5.
Turn the bezel around and insert the
6-32 screw as shown. Tighten it to secure
the POP&LOCK in place making sure that it
fits tightly in the corner of the bezel.
Do not over tighten the 6-32 screw.
6.
Tilt the bezel down, pull the handle as far
as it will go out of the tailgate and slide the
bezel over it. Push the bezel in until the
spring clips snap into the tailgate.
Insert the supplied 6 MM bolt in the center
mounting hole and tighten (do not over-
tighten screw), then tighten the two 8 MM
mounting bolts, making sure that the
handle is straight.
Close latches and test lock for smooth
operation - see Tech Note attached
Installation Instructions
Tailgate Lock PL1300, PL1300H3T & PL1300R
Chevy Silverado/GMC Sierra 1500 ‘07 new body style - up, 2500/3500 ‘08- up
Hummer H3T 2007 - up
For the latest instructions please
visit www.popandlock.net
1-16-2012
Page view 0
1 2 3 4

Summary of Contents

Page 1 - Installation Instructions

1.Lower the tailgate and remove thecenter 8 MM mounting bolt holding thehandle and bezel.Loosen the other two bolts 3/8” to 1/2”.Note: Bedliner panel

Page 2 - 12-27-11

PL1300 Installation Tech Note 2007 and up Chevy Silverado/GMC SierraImportant Note: The PL1300 must be installed with the latches in the

Page 3

Tailgate Lock PL1300 Tech NoteIf you install the lock on your vehicle and it does NOT prevent the tailgate from opening when in the locked position, a

Page 4

LIMITED WARRANTY TERMS AND CONDITIONS (1) Installation. Pop & Lock™, LLC (and Pop & Lock™ Corporation) is not responsible for installing

Related models: PL1300

Comments to this Manuals

No comments